yaq/daemons/bronkhorst-mfc-flow-bus


bugtracker
source

installation

The bronkhorst-mfc-flow-bus daemon can be installed using the following package managers:

PyPI

traits

The bronkhorst-mfc-flow-bus daemon is composed of the following traits:

has-limits
has-position
has-transformed-position
is-daemon
uses-serial
uses-uart

hardware

The bronkhorst-mfc-flow-bus daemon has been tested with the following hardware:

bronkhorst/el-flow

configuration

baud_rate (int) default: 38400
from uses-uart

calibration ({'items': 'calibration_point', 'type': 'array'}) default: [{'measured': 0.0, 'setpoint': 0.0}, {'measured': 1000000.0, 'setpoint': 1000000.0}]
Array of calibration points for MFC, in units.

enable (boolean) default: True
Disable this daemon. The kind entry-point will not attempt to start this daemon.
from is-daemon

limits (array) default: [-inf, inf]
Configuration limits are strictly optional.
from has-limits

log_level ({'name': 'level', 'symbols': ['debug', 'info', 'notice', 'warning', 'error', 'critical', 'alert', 'emergency'], 'type': 'enum'}) default: info
Set daemon log-level.
from is-daemon

log_to_file (boolean) default: False
Optionally force logging to a file.
from is-daemon

make (['null', 'string']) default: None
from is-daemon

model (['null', 'string']) default: None
from is-daemon

native_limits (array) default: [-inf, inf]
Bounds of motion specified in native coordinates. To specify bounds in transformed coordinates, use `limits`.
from has-transformed-position

out_of_limits (enum) default: closest
Control behavior of daemon when set_position is given a value outside of limits.
from has-limits

port (int)
TCP port for daemon to occupy.
from is-daemon

serial (['null', 'string']) default: None
Serial number for the particular device represented by the daemon
from is-daemon

serial_port (string)
from uses-uart

state

The bronkhorst-mfc-flow-bus daemon will provide the following state information:

destination (double)
from has-position

hw_limits (array)
from has-limits

native_reference_position (double)
The reference position, expressed in native coordinates. Default is `0.0`
from has-transformed-position

position (double)
from has-position

messages

The bronkhorst-mfc-flow-bus daemon will expose the following public messages:

busy ➜ boolean
Returns true if daemon is currently busy.
from is-daemon

direct_serial_write ➜ null
Expose direct access to the serial port to clients. This should not be encouraged for normal use, but may be very important for debugging. If a device is expected to return data, it should be logged at the INFO level, not returned to the client. This is done to allow long tasks to be run asynchronously, and to explicitly discourage use of this method except when debugging. Setting `busy` to true is encouraged, but individual daemon writers should consider their own use case.
from uses-serial
parameters:

message (bytes)

get_config ➜ string
Full configuration for the individual daemon as defined in the TOML file. This includes defaults and shared settings not directly specified in the daemon-specific TOML table.
from is-daemon

get_config_filepath ➜ string
String representing the absolute filepath of the configuration file on the host machine.
from is-daemon

get_destination ➜ double
Get current daemon destination.
from has-position

get_fluid_name ➜ string
Read fluid name from MFC memory.

get_limits ➜ {'items': 'double', 'type': 'array'}
Get daemon limits.Limits will be the intersection of config limits and driver limits (when appliciable).
from has-limits

get_native_destination ➜ double
Get the destination in native coordinates.
from has-transformed-position

get_native_limits ➜ {'items': 'double', 'type': 'array'}
Returns limits in the relative coordinate system.
from has-transformed-position

get_native_position ➜ double
Get the current position in native coordinates.
from has-transformed-position

get_native_reference ➜ double
Get the reference position in native coordinates.
from has-transformed-position

get_native_units ➜ ['null', 'string']
Get the units of native coordinates.
from has-transformed-position

get_position ➜ double
Get current daemon position.
from has-position

get_state ➜ string
Get version of the running daemon
from is-daemon

get_temperature ➜ double
MFC current temperature.

get_temperature_units ➜ string
Units of temperature returned by get_temperature.

get_units ➜ ['null', 'string']
Get units of daemon. These units apply to the position and destination properties.
from has-position

id ➜ {'type': 'map', 'values': ['null', 'string']}
JSON object with information to identify the daemon, including name, kind, make, model, serial.
from is-daemon

in_limits ➜ boolean
Check if a given position is within daemon limits.
from has-limits
parameters:

position (double)

set_native_position ➜ null
Set the current position in native coordinates.
from has-transformed-position
parameters:

native_coordinate (double)

set_native_reference ➜ null
Set the reference position in native coordinates. Reference position need not be within hardware limits.
from has-transformed-position
parameters:

native_coordinate (double)

set_position ➜ null
Give the daemon a new destination, and begin motion towards that destination.
from has-position
parameters:

position (double)

set_relative ➜ double
Give the daemon a new destination relative to its current position. Daemon will immediately begin motion towards new destination. Returns new destination.
from has-position
parameters:

distance (double)

shutdown ➜ null
Cleanly shutdown (or restart) daemon.
from is-daemon
parameters:

restart (boolean) default: False

to_native ➜ double
Convert a transformed coordinate to native. This is for debugging purposes and is discouraged in normal use.
from has-transformed-position
parameters:

transformed_coordinate (double)

to_transformed ➜ double
Convert a native coordinate to transformed. This is for debugging purposes and is discouraged in normal use.
from has-transformed-position
parameters:

native_coordinate (double)

types

The bronkhorst-mfc-flow-bus daemon uses the following avro types:

calibration_point (record)
fields:

setpoint (double)

measured (double)


built 2024-02-09 01:44:16                                      CC0: no copyright